Fluke 375 True-RMS 600A AC/DC Clamp Meter
3 Year Warranty
- CAT IV 600
- CAT III 1000 V
Yes! Available 5 units
USD USD 
The Fluke 375 Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms ac voltage and current measurements, the Fluke 375 can read up to 600 V and 600 A in both ac and dc modes with the fixed jaw.
Key Features
- Increased measurement functionality with increased resistance range, frequency measurement and mV dc to interface with other accessories
- Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
Optional use with the 18″ Flexible Current Probe
The Fluke 375 can be used with the Fluke iFlex i2500-18 flexible current probe which expands the measurement range to 2500 A AC while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.
The Fluke 375 is part of Fluke’s new Clamp Meter line that includes: 381, 376, 374, 373 & 365.
Replacing the Fluke 336
The Fluke 375 clamp meter is the direct replacement for the Fluke 336 clamp meter. The Fluke 375 includes all the features of the 336, but also includes:
- CAT IV 600, CAT III 1000 V
- optional iFlex 2500 A AC
- mV DC
- 60 kΩ
- 1000 μF
- Min/Max/Avg
What’s Included:
- Coated instruction card
- Safety information sheet
- Soft carrying case
- TL75 test leads
- Two AA Alkaline batteries
- iFlex flexible current probe expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.
- CAT IV 600 V, CAT III 1000 V
- True-rms ac voltage and current for accurate measurements on non-linear signals
- 500 mV dc measurement range to interface with other accessories
- Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
- Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
- Ergonomic design fits in your hand and can be used while wearing protective equipment
- Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
- Soft carrying case
| Range | Resolution | Accuracy | |
| AC current via jaw | 600 A | 0.1 A | 2 % ± 5 digits |
| AC current via iFlex | 2500 A | 0.1 A | 3 % ± 5 digits |
| DC current | 600 A | 0.1 A | 2 % ± 5 digits |
| AC voltage | 600 V | 0.1 V | 1.5 % ± 5 digits |
| DC voltage | 600 V | 0.1 mV | 1 % ± 5 digits |
| Resistance | 60,000 Ω | 0.1 Ω | 1 % ± 5 digits |
| Frequency | 500 Hz | 0.1 Hz | 0.5 % ± 5 digits |
| Capacitance | 1 μF to 1000 μF | 1 μF | 1 % ± 4 digits |
| True-rms | yes | ||
| Continuity | yes | ||
| Hold | yes | ||
| Backlight | yes | ||
| Min/Max | yes | ||
| Inrush | yes | ||
| Low pass filter | yes | ||
| 18″ iFlex Flexible Current Probe | optional accessory | ||
| 10″ iFlex Flexible Current Probe | optional accessory | ||
| Wire capacity | 750 MCM or 2-500 MCM | ||
| Safety rating | CAT III 1000 V, CAT IV 600 V | ||
