Thickness Gauge J-40-T
Yes! Available 
USD USD 
Measuring Range: 0 – 10 mm / 0 – 0.4 inch
Resolution:0.01 mm / 0.001 inch
The J-40-T thickness gauge can be used to determine the material thickness of non-woven fabrics, textiles, felts, geomaterials, paper, floor coverings, leather, foils, etc. The instrument does not meet the DIN, EN and ISO standards. The feeler shape and the pressure are corresponding to DIN EN ISO 5084 standards. This low-cost thickness gauge is suitable for quick comparison measurements.
 Swing-out foot for on-table operation |
| Digital display with selectable units inch or mm |
| Measuring feeler 20 cm² |
| Zero setting by pushing a button |
| Measuring Range | 0 – 10 mm 0 – 25 mm (J-40-T-25MM only) |
| Resolution | 0.01 mm |
| Depth of Jaws | 40 mm |
| Display | LCD 4 Digit, 8 mm tall |
| Pressure | 1 kPa (gauge, feeler, weight) |
| Feeler shape | 50.5 mm Ø = 20 cm² |
| Dimensions | 103 x 65 x 145 mm (L x W x H) |
| Weight | 230 g (800 g) – net (gross) |
• According to DIN EN ISO 5084
(Measuring face 20 cm² / Druck 0.1 kPa and 1 kPa)
• For fleece according to DIN EN ISO 9073-2
(Measuring face 25 cm² / pressure 0.1 kPa and 0.5 kPa)
• For geomaterials according to DIN EN ISO 964-1
(Measuring face 25 cm² / pressure 2 kPa and 20 kPa, not 200 kPa)
• For non-woven textiles according to DIN 53855
(Measuring face 10 cm² und 25 cm² / various pressures according to standard)
