Power Tech International Group Pvt. Ltd. » Powerware 9140 7.5-10 kVA UPS

Powerware 9140 7.5-10 kVA UPS



Part Number:
In Stock?
Yes! Available
Variation:
Quantity
Price:
$ USD
Total:
$ USD

The Powerware 9140 uninterruptible power system (UPS) delivers de-centralized power protection and power management for medium- and high-density rack environments and superior power management for expanding loads in shrinking spaces. Providing increased power density and power protection capabilities, the 9140 rackmount UPS delivers efficient, reliable power protection in only 6U of rack space, including batteries.

This double-conversion, online rackmount UPS resolves all nine common utility power problems and supplies clean, continuous power to all connected equipment. If utility power goes out altogether, there is no delay transferring to backup power, either to UPS batteries or an auxiliary generator.

  • Protects mission-critical rackmount applications from downtime, data loss /corruption, and process interruption by providing continuous, clean power with double-conversion, online topology

  • Conserves valuable rack space with up to 10 kVA of power in only 6U of height, including batteries

  • Pre-installed rackmount hardware significantly reduces installation time

  • Modular, lightweight design facilitates installation and improves service time

  • Upgradeable from 7.5 kVA to 10 kVA, to accommodate system growth

  • ABM technology significantly increases battery life, resulting in more uptime and fewer battery replacements

  • Lightweight hot-swappable battery and electronics modules allow for easy installation and service

  • Extends battery runtime for up to 45 minutes with up to four 3U EBMs

  • Intuitive LCD interface provides detailed information and UPS management in multiple languages

  • USB and serial ports standard, optional X-slot communication card

Electrical Input
Nominal input voltage Single-phase 200-208V (for 200-208V nominal output); 220-240V
Three-phase 380/220V, 400/230V, 415/240V
Input voltage range Single-phase 160-253V (for 200-208V nominal output); 174-288V (for 220-240V nominal output)
Three-phase 301-499V / 174-288V
Operating frequency 45-55 Hz range for 50 Hz nominal;
55-65 Hz range for 60 Hz nominal
Input power factor PF > 0.99
Input current distortion <5% THD
Electrical Output
Single-phase 200V / 208V / 220V / 230V / 240V
user-selectable
Output voltage regulation +/- 2% static, +/- 10% dynamic
Efficiency >90%
Output Frequency Automatic selection of 50 Hz nominal
(+/- 3.5 Hz) and 60 Hz nominal (+/- 3.5Hz)
Battery Type 12V, 5 Ah, sealed, lead-acid, maintenance-free
Battery Replacement Modular, hot-swappable, user-replaceable
Charger 2.5A charger to support up to 4
additional EBMs
Start-On-Battery Allows startup of UPS without utility input
Communications
LCD Display Multilingual Graphical LCD with backlight
LEDs (4) LEDs for notice and alarm
Communication Ports (1) USB, (1) RS-232 serial, (1) REPO
Communication Slot (1) X-Slot communication bay
Power Management Software Bundled software suite CD
Powerware 9140 is HID-compliant
General
Dimensions HxWxD, in / mm
PW9140 UPS 10.5 (6U) x 17 x 30.0 / 263 x 430 x 760
PW9140 EBM 5.25 (3U) x 17 x 26 / 131 x 430 x 660
Weight PW9140 UPS 254 lb
PW9140 EBM 175 lb
Battery Module 37 lbs
Power Module 40 lbs
UPS Bypass Automatic on overload, overtemp, UPS failure, or removal of power module
Overload to bypass +/- 10% of 112 to 130% for 60 seconds, transfer
Environmental RoHS Compliance EU RoHS / WEEE Compliant
Operating Temperature 0°C to 40°C (32°F to 104°F)
Transit and Storage Temperature -20°C to +50°C (-4°F to 122°F)
Relative Humidity 0-95% non-condensing
Altitude Operating 3000m, Transit 15000m
Audible Noise <55 dBA at 5 feet
Certifications Safety Certifications UL, cULus, NOM, TUV, CE
EMC Compliance Markings FCC, CE, VCCI, C-tick