Power Tech International Group Pvt. Ltd. » Fluke 1AC-II / 1LAC-II VoltAlert
[simple_crumbs root="Home" /]

Fluke 1AC-II / 1LAC-II VoltAlert

Part Number:
In Stock?
Yes! Available

The pocket-sized voltage detector

The next generation VoltAlert™ AC non-contact voltage testers from Fluke are easy to use — just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

A must for safe practices around electricity.

  • Voltbeat™ technology and continuous self-test — so you always know it’s working
  • Upon detection, tip glows and beeper sounds
  • CAT IV 1000 V for added protection
  • Expanded range: 90 V to 1000 V AC or 200 V to 1000 V AC depending on model
  • 20 V to 90 V AC control circuit model also available
  • Two-year warranty
Operating principle
Senses the steady state electrostatic field produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.
Voltage sensing ranges
Nominally, 90 V AC to 1000 V AC or 200 V AC to 1000 V AC depending on model, 45 Hz to 405 Hz; also a 20 V to 90 V control circuit model
Detector tip style
Blade or round, depending on model
Light source
One high intensity red LED
Agency Approvals
c CSA us, CE, TUV, C-Tick
Safety Rating
1000 V, CAT IV
IP Rating
IP 40
Operating Temperature
-10 °C to 50 °C
Operating humidity ranges
0 % to 95 % (0 °C to 30 °C)
0 % to 75 % (30 °C to 40 °C)
0 % to 45 % (40 °C to 55 °C)
Operating Altitude
3000 meters
2 AAA alkaline batteries included

© 2021 Power Tech Private Limited | Theme by Hope Group Of Companies | All Rights Reserved.